The Step by Step Guide to Building a PC
This guide deals with putting parts together to build a working machine. If all the appropriate hardware has not been chosen and bought, ensure that you do that first. Resources found at reviewsbird.co.uk suggest that it’s a smart idea to buy your case at the last minute to make sure it suits it all. If you love learning online and trying DIY projects, you will find this article very helpful. Below are the steps to build a custom PC.

Open the case
The simplest part is to strip the PC down. Instructions for the particular case you have purchased should present your simple design and list special instructions on installation of the components.
Step 1: Power Supply installation
The power supply should be the first item to join the case (PSU). It is normally situated in the lower or top corner at the rear of the box.
In case of questions, the slot can be conveniently placed in at least two corners by looking for a square opening with a screw hole. If you have issues identifying the right location, check your case manual.
Step 2: CPU installation
Then, by mounting the CPU and RAM before fitting in the shell, ready the motherboard. You can install now even more quickly than after the machine motherboard resides
Step 3: RAM installation
There are only two significant considerations to pick a compatible RAM: the path and the slot selection.
Installing it is very convenient. It faces the direction just above the … Read More